series, the PFC functionality was removed on the 120V machines but is still imple-
mented on the 240V machines. This means that the same MC hardware/software can-
not be shared on 120V and 240V machines. There are two different TRM600 MCs
1
,
one for the 120V machines and one for the 240V machines.
1
Motor controller, motor controller unit, or motor controller module: used on treadmills, con-
tains the LPCA and motor controller functionality.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 108
6 Replacement Procedures
Motor Controller (MC) Replacement
To Next Page
Loading...
Need help?
General