6. Align and tension the drive belt to specification, see "Drive Belt Tension and Align-
ment Adjustment" on page 57.
7. Reinstall the hood cover, see "Hood Cover Replacement" on page 82.
8. Connect the power cord and switch the power ON.
9. Verify machine operation (see "Operation Verification" on page 23) and return to ser-
vice.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 138
6 Replacement Procedures
Drive Motor Replacement
To Next Page
Loading...
Need help?
General