Feature Specification
l Diameter: approx. 2.5 in / 6.35 cm (smaller than the
TRM700/800)
l Drive roller installation: Bracket plate shaft mount on the
right side and shaft pin frame hole mount on the right side.
l Take-up roller installation: Uses the single bolt fastener/belt
tension adjustment mechanism.
Drive Motor
230V, 1.12 kW, 3-phase AC
1
induction motor.
The motor controller (MC
2
) implements Integrated Foot Plant
Technology™ and sensorless variable frequency drive technology
for high reliability and accurate speed control.
Emergency Stop
(ESTOP
3
)
Exerciser safety clip and lanyard connected to the stop switch to
immediately switch off power bringing the treadmill to a stop.
Heart Rate
Two Heart Rate sensor types:
l Touch Handheld Handlebar Heart Rate sensors (HHHR
4
).
l Telemetry equipped for wireless chest strap heart rate mon-
itoring.
Ground Effects
®
Impact Control Sys-
tem (GFX
5
®
)
Progressive shock absorption system that absorbs high impact
movements and supports a solid and controlled push off.
Frame Multi-model common frame (TRM600, TRM700, TRM800).
Step-up Height 8.4" (21.3 cm)
Max User Weight Maximum exerciser weight: 350 lbs (159 kgs)
Dimension/Weight
Weight: 392 lbs (149 Kg)
Dimensions:
Length 83 in / 211 cm
1
Alternating Current: electric current which periodically reverses direction between positive
and negative polarity.
2
Motor controller, motor controller unit, or motor controller module: used on treadmills, con-
tains the LPCA and motor controller functionality.
3
Emergency Stop: Safety clip and lanyard attached to the stop switch to immediately turn
off power bringing the treadmill to a stop.
4
Handheld Handlebar Heart Rate
5
Ground Effects Impact Control System: Patented treadmill design that out performs a nat-
ural running surface, absorbs high-impact movement, reduces joint stress and minimizes
fatigue and supports a solid and controlled push off.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 6
2 General Information
Features