Precor Experience TRM631 User Manual

When the test is completed the console will automatically exit and return to
the System Tests menu.
l Touchscreen Test: Verify that there is a trace created that follows your fin-
ger movement across the touchscreen surface. Select Finish to exit.
move your finger and verify that a trace follows
l Backlight Test: Tests the display backlight brightness. Follow prompts to
complete test.
l RGB Test: Touch the screen to cycle through the test colors: Red, Green,
Blue, White, & Black. Returns to the System Tests menu when completed.
l Numeric Backlight Test: Tests the controls numeric display brightness.
Returns to the System Tests menu when completed.
l Numeric Display Test: Tests the controls numeric display. Returns to the
System Tests menu.
2. Exit the Diagnostic Test menu. (press Back to exit & return to the banner screen)
Machine Operation Test
This test verifies the console functionality (motion controls & metric indicators) and
machine operation.
1. Select QUICKSTART to begin a manual workout. Do this test while walking on
the machine and the set to 0% incline:
2. Operate the SPEED motion control from minimum to maximum range while veri-
fying the machine operation.
l Make sure that the console SPEED paddle control operation is smooth
and working correctly.
l Verify that the running belt can reach the maximum speed and then
returns to the minimum speed level.
l Make sure that the running belt speed change is smooth and that there are
no unusual noises.
l Verify that the console SPEED indicators and workout displays are show-
ing correct information.
3. Operate the INCLINE motion controls from minimum to maximum range while
verifying the machine operation. Set the SPEED between 2-3 mph and walk on
the belt while performing this test.
l Make sure that the console INCLINE paddle control operation is smooth
and working correctly.
l Verify that the running deck can reach the maximum incline and then
return to the minimum incline level.
l Verify that the lift motor operation is smooth while changing the INCLINE
from minimum to maximum levels.
l Verify that the console INCLINE level indicators and user workout displays
are showing correct information.
Running Belt Test
(Internet Only)
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 24
3 Operation Verification
Operation Verification Tests

Precor Experience TRM631 Specifications

General

Brand	Precor
Model	Experience TRM631
Category	Treadmill
Language	English