4. Increase the speed to 6 mph (10 kph) verify tracking, then increase the speed to 9
mph (14 kph) verify tracking, and finally increase the speed to 12 mph (19 kph) and
verify tracking. Make sure that the tracking remains centered at each speed, make
small adjustments as needed.
5. Make sure that the treadmill is level and stable, adjust the two rear leveling feet as
necessary.
Note: An unlevel unstable treadmill can cause tracking issues with use.
6. Replace the left/right trim landing covers, see "Covers and Panels Replacement" on
page 80.
7. Replace the hood, see "Covers and Panels Replacement" on page 80.
8. Verify treadmill operation (see "Operation Verification" on page 23) and return to ser-
vice.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 68
5 Adjustment Procedures
Running Belt Tension and Tracking Adjustment
To Next Page
Loading...
Need help?
General