Precor TRM 211 User Manual

Advanced Programming and Troubleshooting
43
Troubleshooting Error Codes
Initially, when the unit is turned On, the console lights
all its LEDs. If any are dark, call an authorized service
person for assistance.
The following table shows the error codes that may
appear in the display. If you see these error codes, call
an authorized service person for assistance because
the treadmill needs to be recalibrated.
Important: You should not attempt to service the
treadmill except for maintenance tasks as described in this
manual. The treadmill does not contain any
user-serviceable parts that require lubrication. For
information about product operation or service, see the
Precor web site at www.precor.com. For future reference,
write the model, serial number, and date of purchase for
your unit in the space provided. The serial number is
printed on a label located on the front panel, near the
power cord (refer to Obtaining Service).
Table 2. Common error codes
Code Description
E3 EEPROM error.
E26 Speed signal is not being received.
E40 A problem occurred with the lift.
303207-110 rev A TRM 211 Owner's Manual 031914 EN-US - body only with crops.pdf 43 3/25/2014 12:55:22 PM

Precor TRM 211 Specifications

General

Speed Range	0.5 - 12 mph
Display Type	LCD
Running Surface	20" x 57"
Weight Capacity	350 lbs
Heart Rate Monitoring	Contact sensors
Motor Power	3.0 HP
Programs	6 preset workouts