© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 108
12 Adjust the drive belt tension per the Procedure, Adjusting Drive Belt
Tension (on page 119).
13 Tensioning the Running Belt as per procedure, Tensioning the Running Belt
(on page 122) and Running Belt Tracking Adjustment as per procedure
,Running Belt Tracking Adjustment (on page 124).
14 Replace the belt guard, ensuring the belt guard tabs are firmly locked
in the frame locking tabs and snapped onto the take up roller shaft.
15 Replace the end caps, deck trim strips and motor cover.
To Next Page
Loading...
Need help?
General