Precor TRM10/GEN06 User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 47
Error 80, 81, 82, & 83 – P30 Machine Controls Not Working
Description
This error monitors the incline (up and down), and speed (up and down)
controls of a P30 console. These switches are not traditional
mechanical switches, they are optical switches.
 Error 80, P30 Lift Up Not Working
 Error 81, P30 Lift Down Not Working
 Error 82, P30 Speed Up Not Working
 Error 83, P30 Speed Down Not Working
Possible Causes
1 Machine control interconnect cable has come unplugged from the upper
PCA.
2 Bad machine control cable.
3 Bad machine control assembly.
Possible Remedies
1 Open the P30 console to expose the circuit boards, and verify that
the machine control cable has not become unplugged from the upper
PCA.
2 Substitute a known good machine control cable.
3 Substitute a known good machine control assembly.

Precor TRM10/GEN06 Specifications

General

Brand	Precor
Model	TRM10/GEN06
Category	Treadmill
Language	English