© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 31
This section contains troubleshooting procedures and presents a
methodology for identifying and isolating system issues. Not all system
issues will create an error code condition so the approach is to identify
and verify the stated problem and then use the systems own self tests to
help isolate the problem. In many cases, that will include the use of
error codes, but not always.
Introduction to Treadmill Troubleshooting ......... 31
Troubleshooting Tripped Breakers .................. 31
Troubleshooting No Power to the Console ........... 35
Standardized Error Codes .......................... 36
Troubleshooting Input Power & Control Error Codes . 41
Troubleshooting the 3 Phase AC Drive Motor System . 48
Troubleshooting the Incline System ................ 55
Troubleshooting Communications Errors ............. 66
Running Belt & Deck Troubleshooting ............... 68
Troubleshooting the Auto Stop Feature ............. 70
Introduction to Treadmill Troubleshooting
The failure that is reported by the user may differ from your
observations as a trained technician. That is why it is important
to validate the reported failure. The first step in this
investigative troubleshooting methodology is to first identify the
current overall operating condition of the treadmill. Is it
operational or not. If the system powers up and can be at lease
partially operated:
o Follow the procedure, Validating the Reported Failure (on page 40).
If the treadmill does not turn on, trips the breaker or the console
will not illuminate:
o Follow the appropriate procedure for Troubleshooting Tripped Breakers
(on page 31) or Troubleshooting No Power to the Console (on page 35).
Troubleshooting Tripped Breakers
It is extremely important to note whether the unit’s breaker trips or the
wall outlet breaker trips. It is also extremely important to note when
the trip occurs:
Immediately on power up
After the belt starts but before the user walks on the belt
After the user walks on the belt.
Section 7 - TRM Base Troubleshooting
Procedures
To Next Page
Loading...
Need help?
General