© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 52
Error 27 - Too Much Drive Motor Current
Description
Some treadmill motor controllers monitor the amount of current being
delivered to the drive motor. The software sets a maximum amount of
allowable drive motor current. This error indicates that maximum drive
motor current has been reached.
Possible Causes
1 The running belt and/or running bed is badly worn.
Possible Remedies
1 A clamp-on AC ammeter must be used to determine the amount of AC
input current being drawn by the treadmill under no load and loaded
conditions. Follow the troubleshooting per procedure, Running Belt &
Deck Troubleshooting (on page 68).
To Next Page
Loading...
Need help?
General