Prodigy Autocode - Page 24

Owner’s Manual
AutoCode
®
Blood Glucose Meter
24
Figure 10
Figure 11
STEP 5: Set the Year
Press and release the “M” button to
advance the year. With the correct
year on the display, press the “SET”
button. The date will then appear
on the display with the month seg-
ment ashing. See Figure 10.
STEP 6: Set the Month
Press and release the “M” button
to advance the month. With the cor-
rect month on the display, press the
“SET” button. The date segment will
start ashing. See Figure 11.
STEP 7: Set the Date
Press and release the “M” button to
advance the date. With the correct
date on the display, press the “SET”
button. The time will appear on the
display with the hour segment ash-
ing. See Figure 12.
Figure 12