Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
25
Figure 13
STEP 8: Set the Hour
Press and release the “M” but-
ton to advance the hour. With
the correct hour on the display,
press the “SET” button. The min-
utes segment will start ashing.
See Figure 13.
STEP 9: Set the Minutes
Press and release the “M” button
to advance the minutes. With the
correct minutes on the display,
press the “SET” button and then
the current unit of measurement
will start ashing.
Important: Day averages are calculated from results
obtained during the 7, 14 and 28 days preceding the
current date and time settings.
To Next Page
Loading...
