Prodigy Autocode User Manual

Owner’s Manual
AutoCode
®
Blood Glucose Meter AutoCode
®
Blood Glucose Meter
43
Figure 33
Figure 34
If the conrmation window is not full,
“L-b” will be displayed. You will have to
try the test again using a new test strip.
See Figure 33.
CAUTION
DO NOT:
• Smear or scrape the blood onto the test strip.
• Apply blood to the test strip when the test strip is
not in the meter.
• Put blood or foreign objects into the test strip slot.
STEP 3: Read Your Result
After the meter counts down from 6
to 1, your blood glucose test result will
appear, along with the unit of measure,
date and time. See Figure 34.
If you have trouble lling the test
strip, contact Customer Care at
1.800.243.2636 for assistance.
Voice Speaks: “Blood glucose,
108 mg/dL.”

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results