Blockage in the waste water drainage pipe
The waste water plumbing system is made of durable black plastic. The movable
connectors are designed for hand tightening. Do not use tools to tighten the connectors.
The tanks need a bit of water to prevent odours from entering the trailer, as well as aseptic
tank deodorant product.
How to clear a blockage from your drain pipe
After the waste water tanks have been emptied, matter may remain in the tanks and cause
a blockage.
If this occurs, you can rinse the tanks with the following procedure.
1 Wear gloves to protect your hands when handling the waste water system.
2 Connect your tankto a compliant cleanout facility.
3 Empty the tankas described above.
4 Connect a water hose to a municipal water supply. Keep the toilet flush mechanism
open and insert the fresh water hose to fill your waste water tank through the drain
in the toilet bowl.
5 Open the waste water tank cleanout valve and empty the water from the tank.
6 Close the waste water tank cleanout valve.
7 Repeat steps 4 to 6 as required.
Always empty black water before grey water, so the latter cleans the
waste water hose.
WASTE WATER SYSTEM
101
101
To Next Page
Loading...