Controlling relative humidity
Checking and controlling relative humidity in a recreational vehicleis important to minimize
the risks and damages linked to humidity. Ideally, relative humidityshould be 60 percent or
less. In a cold climate, a rate of less than 35 percent is acceptable.
Measures against mould
In addition to controlling relative humidity and the methods suggested in the air quality
section to control mould, certain measures can be taken to avoid mould problems inside
your trailer.
1. Before you place anything inside your recreational vehicle, look for signs of mould.
Household goods, articles or food may already contain mould.
2. Do not hang damp clothing inside the trailerto dry.
3. Ventilate the kitchen and bathroom by opening the windows. Run the vent fans or air
conditioner as appropriate.
4. Clean up spills quickly.
5. Dry damp surfaces and quickly replace any material that cannot be
completely dried.
6. Inspect for leaks on a regular basis and repair all leaks quickly.
7. Take note of mouldy odours and visible signs of mould.
High humidity promotes the growth of mould. If optimal growth
conditions persist, the mould can grow exponentially in just
24 to 48 hours.
AIR QUALITY
114
114
To Next Page
Loading...