Exterior checks
• Retract and lock the awning.
• Disconnect all electrical, water and waste connections. Stow all cables and hoses.
• Close and lock all exterior compartments.
• Remove all obstacles under the trailer.
• Retract the stabilizers and stow all blocks.
• Check tire pressure and wheel nuts.
• Close and lock the entrance door.
• Close and lock the front window protective panel (Rockguard).
• Keep the trailer wheels chocked until the hitch has been secured.
Trailer stabilizer levers
The stabilizer levers are located at the corners of the chassis, at the front or back of the
trailer, depending on the model, and are designed to stabilize the trailer after it has been
levelled on the ground. These stabilizers are not designed to lift the trailer.
Use them to give your trailer firm stability so it does not move or bounce when you walk
around inside the trailer.
HITCH AND INSTALLATION
146
146
To Next Page
Loading...