024
Walls
Our walls are made of wood for easy screwing and gluing, with an ultralight core of rigid
foam that provides high quality thermal and acoustic insulation.
The inside wall face is vinyl laminated for easy cleaning and to protect the walls from
humidity. On the exterior wall face, Prolitetrailers are covered with ultraviolet (UV)-treated
high-qualityfibreglass.
Floor
Our floors are made of poplar plywood and covered with durable linoleum that is very
resistant to various temperature and humidity conditions. It is glued over the entire area to
avoid cracks that may occur in low-temperature conditions. The exterior face under the
trailer is covered with a fibreglass composite panel (TekModo) that prevents insects and
rodents from entering your trailer. It protects your floor from water, salt, dirt, etc.when
travelling on the highway or parked over a damp surface.
STRUCTURE AND CHASSIS
Our walls are made
using the sandwich
principle, so water
cannot accumulate
inside the walls.
Water infiltration
can be detected
and corrected
quickly, unlike with
walls containing
batt insulation, in
which the
infiltration may
continue for
months with no
way of knowing
about it, until it is
too late, and the
rot and mould
become visible.
UV-treated high-quality breglass Rigid insulation
Vinyl-laminated
lauan plywood
24
To Next Page
Loading...