ProLite Plus - Calendar of Maintenance Recommended by the Manufacturer of the Axles, Suspension, Brakes and Tires

Bearings and
housing
Wheel nuts and bolts
Check for rust, clean and grease (100 g per wheel).
Readjust bearing nut.
Tighten to required torque.
Brake adjustment Adjust to specifications.
Brake magnets Inspect for wear and current draw.
Brake linings Inspect for wear and contamination.
Brake modulator
Check intensity and modulation.
Brake cylinders
Check for leaks or seizure.
Brake lines Check for cracking, leaks or kinks.
Trailer brake cables Check for stripped frayed insulation.
Parking brake Check load status and switch.
Hub / drum Check for abnormal wear and scoring.
Seals Check and replace as required.
Springs Check for wear and sag.
Suspension accessories Check for twisted, loose or worn bolts.
Spring mount Check welds.
Wheels Check for cracks, dents, or deformations.
Tire pressure Inflate to manufacturer’s specifications.
Tire condition
Check for cuts, wear or bulging.
Immersion in water
Fill cavity completely.
Brake
Check condition and operation.
Parts Actions required
Each
week
3 months
4500km
6 months
9000km
12 months
18000km
EACH USE
EACH USE
* It is important to comply with all actions required for maintenance of your trailer, as indicated in the maintenance calendar above. Failure to do so may void the Frameco warranty.
MAINTENANCE
Calendar of maintenance recommended by the manufacturer of the axles,
suspension, brakes and tires
Consult the calendar below and follow all the manufacturer’s recommendations.
181
181