We suggest that you purchase levels that can be fastened to your trailer.
These will help you greatly when levelling your trailer.
HINTS AND TIPS
Position the stabilizers on pieces of wood or plastic.
5. Unplug the seven-conductor electrical connector from the towing vehicle.
6. Use a level to check the trailer, both transversally and longitudinally, on the trailer
floor. Raise or lower the height with the jack handle on the tongue until the trailer is
perfectly level from front to back.
7. Adjust the stabilizers, lowering them to the ground, and ensure that the trailer’s
weight is supported by the axles.
8. Once the traileris stable, you can proceed withthe other installations such as
the motorized extension, water, electricity, etc.
When unhitching the trailer from the car, be safe. An unexpected
movement might pin someone and cause serious injury.
WARNING
HITCH AND INSTALLATION
Never use the emergency brake to secure your trailer. This will not only
drain your trailer’s battery very quickly but might also cause a fire in the
brake switch.
WARNING
148
148
To Next Page
Loading...