protech PA-6225 - Page 90

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 83
c. Set print region (ESC W) in the page mode.
d. Character expansion position
ESC SP n
[Name]
Set right-side character spacing.
[Format]
ASCII ESC SP n
Hex. 1B 20 n
Decimal 27 32 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
This command sets the size of space to right of character.
Right space = n × [horizontal motion units].
ESC ! n
[Name]
Select print mode(s).
[Format]
ASCII ESC ! n
Hex. 1B 21 n
Decimal 27 33 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
This command selects print mode(s) with bits having following meanings.
Bit
On / Off
Hex
Decimal
Function
0
Off
00
0
Character font A selected.
On
01
1
Character font B selected.
1
Off
00
0
Not used. Fixed to Off.
2
Off
00
0
Not used. Fixed to Off.
3
Off
00
0
Emphasized mode not selected.
On
08
8
Emphasized mode selected.
4
Off
00
0
Double-height mode not selected
On
10
16
Double-height mode selected
5
Off
00
0
Double-width mode not selected.
On
20
32
Double-width mode selected.
6
Off
00
0
Not used. Fixed to Off.
7
Off
00
0
Underline mode not selected.
On
80
128
Underline mode selected.