PROTECO S.r.l. Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
ANNEX 1 - Table for PROGRAMMING
= DEFAUL Settings
RADIO MenU
SAVING a new remote control – START command
SAVING a new remote control – PEDESTRIAN START command
SAVING a new remote control – 2° RADIO CHANNEL
With optional AUX module only
DELETING an existing remote control code
DELETING ALL stored remote controls
PROGRAMMING Menu
AUTOMATIC Programming Procedure with OBSTACLE DETECTION
SEQUENTIAL Programming Procedure
Reset to Default Settings for RAM openers
Reset to Default Settings for ARTICULED ARM openers
Reset to Default Settings for WHEEL-DRIVEN openers
FORCE Menu
TORQUE/POWER adjustment - Motor 1
TORQUE/POWER adjustment - Motor 2
OBSTACLE DETECTION level adjustment - Motor 1 With AUTOMATIC Programming procedure only
OBSTACLE DETECTION level adjustment - Motor 2 With AUTOMATIC Programming procedure only
SPECIAL FUNCTIONS Menu
MULTI-OCCUPATION Function
PRE-BLINKING Function
DECELERATION Fuction
PHOTOCELLS TEST Function
REVERSING STROKE Function With electric lock and MEL04 module only
LOCK PULSE Function With electric lock and MEL04 module only
START PULSE Function
SOFT-START Function
QUICK CLOSING Function
SINGLE LEAF Function
SEPARATE PUSH-BUTTONS Function
MOTORS TEST Function
FINAL RELEASE in CLOSING – Motor 1 Program. procedure only
FINAL RELEASE in OPENING – Motors 1 and 2 Program. procedure only
FLASHING LIGHT mode
(max)
= memory is full
(max)
= memory is full
(max)
= memory is full
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF = ON
= OFF
(max)
= OFF
(max)
= flashing
= FIX (LED)
= SOFT START
To Next Page
Loading...
Need help?
General
