Protek 3201 - RS-232 C COMMAND - Mode and Squelch Settings; SSB BFO Level Setup; Mode Setup Commands; Hold and Receiving Mode Commands

Ex.) D1 CR: CH BANK in No 2
SCAN MODE will be operated in CH SCAN MODE only
5) SSB BFO LEVEL Setup
E0(30CH) BFO on LOW(-)
E0(6FH) BFO on MID(0)
E (AFH) BFO on HI(+)
Ex.) E0 CR: On LOW
Receiving MODE is operated on SSB MODE Only
||
||
6) MODE Setup
F0 OFF
F1 DELAY RUN MODE
F2 DELAY HOLD MODE
F3 HOLD STOP MODE
Ex.) F1 CR: On DELAY RUN MODE
58
58
7) MAX HOLD Setup
G0 OFF
G1 MAX HOLD
G2 HOLD
Ex.) G1 CR: On MAX HOLD
8) Receiving MODE Setup
H0 N-FM MODE
H1 W-FM MODE
H2 AM MODE
H3 SS MODE
Ex.) H2 CR: On AM MODE
9) SQUELCH LEVEL Setup
I0(30H) SQUELCH ON ONLY
I1(31H) SQUELCH ON 0dB(Adding on 1dB)
I2(32H) SQUELCH ON 1dB
*II(49H) SQUELCH ON 25dB
Ib(63H) SQUELCH ON 50dB
ld(64H) SQUELCH OFF ONLY
Ex.) I4 CR: SQUELCH ON 3dB
10) CH MEMORY, DATA MEMORY COPY Input/Output
*J0 COPY input START
J1 COPY output START