56
Figure 5-12 Information screen view
5. Biomed mode
In system setting screen, touch 【Biomed】 icon, and it needs password to enter Biomed
screen. It is shown as below.
Biomed mode is mainly used by trained engineers of the Company to carry out the
calibration, testing and software upgrade.
In Biomed mode, you can set altitude. Altitude setting range: -1000~8000m.
Default setting: 100m.
Figure 5-13 Password input screen view
5.11 System log
The System log screen provides the operator with reviews of previous alarm messages
and setting, and it records time and contents.
The time of system logs are stored in accordance with their generated time sequence.
Touch to select【Page up】 or 【Page down】 to review more logs.
To Next Page
Loading...