90
Appendix E Electromagnetic Capability
Cautions:
Boaray 5000 C/D series should meet the requirement of electromagnetic
compatibility in EN 60601-1-2:2015.
The user needs to install and use according to electromagnetism compatibility
information which is attached with it.
Portable and mobile RF communication devices may influence the system’s
performance, so it should be kept away from them during using.
Please refer to the below section of guidance of electromagnetism compatibility and
manufacturer’s declaration.
Warnings:
Boaray 5000 C/D series should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, the system should be
observed to verify normal operation in the configuration in which it will be used.
Type A equipment is intended for use in the industrial environment, due to the
conduction and radiation disturbance of the Boaray 5000 C/D series. it is difficult to
ensure the electromagnetic compatibility while using in other environments.
Cables or components as the spare parts supplied by the manufacturer must be used
for Boaray 5000 C/D series, otherwise, it might cause the increase of emissions or
the decrease of immunity.
To Next Page
Loading...