quadient IS-240 - How to Create a Job Memory

Configuring your Mailing System
137
9
Managing Job Memories
Follow the procedure below to create a Job memory.
How to Create a Job Memory
How to Create a
Job Memory
To create a Job memory logged as Supervisor
(See
How to Log in as Supervisor p.120):
1 Either:
The current list of Job memories is displayed in the
Job Me-
mories screen.
2 Select a line named None in the list.
3 Press [OK] to create a new job memory.
4 Enter the name of the new job memory, then press [OK] .
5 Select parameters and press [OK] to validate and display the
next list of parameters (you can also modify the parameters
later).
6 Repeat the previous step until the system displays the name
of the new job memory in the list.
Press and type 4
Or
Select the path: > Job Memory Management
ALPHA1_UK.book Page 137 Jeudi, 6. septembre 2012 4:08 16