quadient IS-240 - Generating Reports; How to Generate Reports (User)

Reports
83
6
Generating Reports
Generating a report requires to select the desired report and how you want to display
or record the report on:
• Screen.
• An envelope (or label tape).
• An external printer (if installed).
• A USB memory device.
Follow the procedures below as user or as supervisor.
How to Generate Re ports (Use r)
How to Generate
Reports (User)
To generate a report as a User:
1 Either:
2 A list of available report types is displayed.
3 Select the report type and press [OK] .
4 Depending on the report type, the system may ask for para-
meters such as:
 Period of time targeted (begin date, end date)
 Desired account, etc.
 Select or type the required parameters and press [OK] .
 The Output selection screen is displayed.
5 Select an available output device and press [OK] .
The system sends the report details to the selected output.
6.2 Generating Reports
Press and type 6
Or
Select the path: > Reports
Output selection varies according to the report selected.
When displaying a report on screen, use the arrow keys and
to display the different pages of the report.
ALPHA1_UK.book Page 83 Jeudi, 6. septembre 2012 4:08 16