quadient IS-240 - How to Add (or Cancel) an ERA on the Imprint

Processing Mail
53
3
How to Add (or Can cel) an ERA on the Imprint
How to Add (or
Cancel) an ERA
on the Imprint
To add an ERA to the imprint, or to cancel the ERA as User:
1 Either:
2 Select > ERA and press [OK] (or type 2 ).
The
ERA Slogans screen is displayed.
3 Select the desired ERA in the list or None for printing no
ERA.
The icon indicates the current selection.
4 Press [OK] to validate your selection.
The
Imprint screen is displayed with updated parameters.
Press and type 1
Or
Select the path: > Imprint
If a slogan is already selected, a warning message appears to
notify that the ERA selection will replace the current slogan. Make
sure you do want to replace the slogan before confirming the ERA
selection.
ALPHA1_UK.book Page 53 Jeudi, 6. septembre 2012 4:08 16