Processing Mail
26
3
Parameters of the Type of Imprint
• The table below indicates the type of imprint to choose, depending on the type of
process you want to apply to each set of mail.
• The column on the right indicates, for each type of imprint, the parameters you can
set before printing mail.
• The Mailing System uses default values defined as supervisor.
See also
• To set default values as supervisor: see
Configuring your Mailing System
p.117.
Type of process Type of imprint
Parameters
Apply postage to outgoing
mail
[Normal]
• Rate
• Weight
• Date format
• Slogan (optional)
• ERA (optional)
Enter the postage amount
manually
[Manual Amount Entry]
• Slogan (optional)
• ERA (optional)
• Amount
Print 'Received' and/or
the date on incoming mail
[RCVD]
•
Printing date and/or
'Slogan RCVD' .
By default, the machine selects the [Normal] type of imprint at
start-up.
ALPHA1_UK.book Page 26 Jeudi, 6. septembre 2012 4:08 16
To Next Page
Loading...
