980 DP Video Generator - User Guide Rev. A4
Page 383 July 14, 2014
11.176.9 Purpose
To present an undistorted display, the horizontal and vertical sweeps of the electron beam across the face of the
CRT should be at uniform speeds. Any non-uniformity in the sweep will cause portions of an image to be stretched
while other portions will be compressed. Non-linearity in a monitor can show up in several ways. It may be present
across the entire screen, a large portion of the screen, or it may be localized in a very small area.
11.176.10 Method
Adjust the display’s linearity controls so that all of the boxes in the crosshatch are identical in size. You can
measure the boxes with a ruler or with a gauge made for the monitor
under test. Any deviation should be within
your specification limits.
To Next Page
Loading...