Quick MILL 938545 - Page 100

100
Italiano
Deutsch
English
• ECO function
ECO
Press the button (1) to change the minutes to wait before the machine enters Eco
mode.
Choose the minutes with the arrow keys (2) and (3) between
0 _ 30 _ 60 _ 90
Press the button (1) two seconds to confirm the choice.
When the machine is in Eco mode, a dot appears on the display. The LEDs go
out and the temperature is raised to 60°C. To exit the Eco function press any
button.
• Standby Mode
STB
Press the button (1) to change the minutes to wait before the machine enters
standby mode.
Choose the minutes with the arrow keys (2) and (3) between
0 _ 30 _ 60 _ 90
Press the button (1) two seconds to confirm the choice.
If both modes (Eco and Stand-by) are enabled, Stand-by has priority.
When the machine enters stand-by mode, three dots appear on the display and
the buttons are switched off.