101
Italiano
Deutsch
• Pre-infusion
PR1
Press button (1) to set the pre-infusion to
ON
Press button (1) again to set the pre-infusion seconds.
Choose with the arrow keys (2) and (3) between
0on_1on_2on→ 9on
Press the button (1) two seconds to confirm your choice.
• Offset
OFS
The offset is the value that compensates the temperature of the heating element
compared with the supply temperature.
Press button 1 to set the offset 0 - 25°C. Choose with the arrow keys (2) and (3)
between
0 _ 25°C
Press the button (1) two seconds to confirm the choice.
IT IS RECOMMENDED to keep the standard set.
To Next Page
Loading...
Need help?
General
