Raddy RF919 - 7.3.10.1 FM reception settings

To Next Page

To Previous Page

Extended Manual for RF919 v2.1

7.3.10.1 FM reception settings

As the FM band is above 30 MHz, only the relevant reception settings are available.

Setting parameter

Options within sub-menu

ANT-DEFAULT

Default settings for antenna signal

ANT-KEEP-PASS

Keep current antenna signal routing

ANT-CHANNEL

ANT-HPF

HighPassFilter

ANT-LNA1

LNA1 channel

ANT-LNA1-GAIN

ANT-LNA1-GAIN-L

LNA1 antenna channel low gain

ANT-LNA1-GAIN-H

LNA1 antenna channel high gain

ANT-LNA2-GAIN

ANT-LNA2-GAIN-L

LNA2 antenna channel low gain

ANT-LNA2-GAIN-H

LNA2 antenna channel high gain

ATT-GAIN

ANT-10dB

antenna attenuation 10dB

ANT-20dB

antenna attenuation 20dB

Main Page

Table of Contents2
About5
1 Product overview7
2 Product features8
3 What is in the box?10
4 Get started11
5 Buttons and their functions13
- 5.1 Buttons below the primary display13
- 5.2 Buttons below the secondary display14
- 5.3 Buttons surrounding the tuning knob15
- 5.4 Buttons besides the numerical keypad16
- 5.5 Buttons and sockets on the right side of the radio17
- 5.6 Switch and socket on the back side of the radio18
- 5.7 Buttons and sockets on the top side of the radio19
6 The primary and secondary screen20
- 6.1 The primary screen20
- 6.2 Icons on primary screen20
- 6.3 Messages on primary screen23
- 6.4 The secondary screen24
7 Functions25
- 7.1 Power on / Power off25
  - 7.1.1 Turn the radio on/off25
  - 7.1.2 Set the sleep timer25
- 7.2 Adjust the volume25
- 7.3 Listen to the radio25
8 Use of TF card38
- 8.1 Inserting a TF card38
- 8.2 Automatic playback of tracks38
- 8.3 Record on TF card39
9 Equalizer setting40
10 Bluetooth mode41
- 10.1 Connect via Bluetooth41
- 10.2 Disconnect from Bluetooth41
11 Control via APP42
- 11.1 The APP interface43
- 11.2 The APP symbols and controls44
- 11.3 Operating modes47
12 Use of the lock button48
13 Set current date and time49
14 Set alarm time50
- 14.1 Turn off the alarm time51
- 14.2 Confirm alarm51
15 System settings52
16 USB Type-C charging54
17 Use as TF card reader54
18 AUX input54
19 Temperature display54
20 Use of antennas55
- 20.1 Built-in magnetic antenna56
- 20.2 Receiving operating mode56
  - 20.2.1 External antenna sockets56
21 Frequencies of some stations57
- 21.1 Shortwave stations57
- 21.2 GMRS/FRS frequencies58
- 21.3 PMR446 frequencies58
22 Cleaning and maintenance59
23 Safety tips59
24 Common problems and how to solve them60
25 Technical specifications61
- 25.1 General specifications61
- 25.2 Covered frequency ranges61
26 Certification62
27 Where to find support material63

Raddy RF919 - 7.3.10.1 FM reception settings

Table of Contents

Related product manuals