Extended Manual for RF919 v2.1
© 2024 page 39 of 63
8.3 Record on TF card
The RF919 is able to record a received audio stream MP3-encoded with
160 kBit/s on a inserted TF card. When the radio is working, insert a TF card.
Start: Long press [ ] to start recording the current audio sound.
“RECORDING” flashes on the primary screen and the elapsed
recording time is displayed on the secondary screen.
Stop: Long press [ ] to stop recording the current audio sound.
Playback: When in TF card playback mode (see chapter 8.2 “Automatic playback
of ” on page 38), long press [ ] key to start playback of recorded
tracks. Use [ ] and [ ] key or rotate the small or big tuning knob
[ ] to navigate. Press the inner tuning knob [ ] to select the
recording file to be deleted. Long press [DEL] key, "del" will be
flashing on the primary screen. Long press [DEL] again to confirm
deletion. See chapter 5.3 “Buttons surrounding the tuning knob” starting
on page 15 for details.
Delete: Press [ ] to enter TF card playback mode and select from the TF music
list. Then long press the [DEL] key for two seconds. “del” flashes on
the primary screen. Now long press the [DEL] key again to confirm the
deletion of the selected recording.
Notes: Non self-recorded tracks cannot be deleted.
Alternatively connect the radio via USB to your PC and use the TF card
reader functionality to modify the TF card content. See chapter 17 "Use
as TF card reader” on page 54 for details.
To Next Page
Loading...
