Extended Manual for RF919 v2.1
© 2024 page 62 of 63
26 Certification
The RF919 is:
• FCC Part 15 Subpart C certified with FCC ID: 2APU9-HRD-C919
• CE approved and verified to Radio Equipment Directive 2014/53 EU
• Conformant to ETSI EN 303 345-1 V1.1.1:2019-06 (“Broadcast Sound
Receivers; Part 1: Generic requirements and measuring methods”)
• Conformant to ETSI EN 303 345-2 V1.2.1 (2021/12) (“Broadcast Sound
Receivers; Part 2: AM broadcast sound service; Harmonised Standard for
access to radio spectrum”)
• Conformant to ETSI EN 303 345-3 V1.1.1;2021-06 (“Broadcast Sound
Receivers; Part 3: FM broadcast sound service; Harmonised Standard for
access to radio spectrum”)
• Conformant to ETSI EN 300 328 V2.2.2 (2019-07) (“Wideband transmission
systems; Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum”)
• Conformant to ETSI EN 301 489-1 V 2.2.3 (2019-11) (“ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1:
Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility”)
• Conformant to ETSI EN 301 489-17 V3.2.4 (2020-09) (“ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 17:
Specific conditions for Broadband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility”)
• Conformant to EN 55032:2015+A11:2020 (“Electromagnetic compatibility
of multimedia equipment. Emission requirements”)
• Conformant to EN 55035:2017+A11:2020 (“Electromagnetic compatibility
of multimedia equipment. Immunity requirements”)
• Conformant to EN IEC 61000-3-2:2019+A1:2021 (“Electromagnetic
compatibility (EMC) Limits. Limits for harmonic current emissions
(equipment input current 16 A per phase))
• Conformant to ETSI EN 300 328 V2.2.2 (2019-07) (“Wideband transmission
systems; Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum”)
• Conformant to EN 61000-3-3:2013+A2:2021+AC:2022 (“Electromagnetic
compatibility (EMC) Limits. Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage supply systems, for
equipment with rated current ≤ 16 A per phase and not subject to
conditional connection”)
• Conformant to EN 62368-1:2014+A11:2017 (“Audio/video, information and
communication technology equipment - Part 1: Safety requirements (IEC
62368-1:2014, modified”)
• Conformant to EN 50663:2017 (“Generic standard for assessment of low
power electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields (10 MHz - 300 GHz)”)
To Next Page
Loading...
