Raddy RF919 - Page 53

Extended Manual for RF919 v2.1
© 2024 page 53 of 63
Main menu
Sub-menu options
C-KEY SETTING
Set the light on time in working state
TIME SET 05-S/06-S/07-S/08-
S......30-S/FULL
Rotate the tuning knob [ ] to select the
time. ”FULL” means the backlight of the keys is
always on. In case of no operation within 10
seconds, the final choice will be confirmed
automatically. Time display will be recovered.
APP ENABLE
Connect/disconnect APP
APP DISABLE
APP doesn’t work (this might be helpful for
power saving and interference reduction)
APP ENABLE
APP works normally
TIMER OFF
Display/off of the primary screen
TIMER DISPLAY
The time display of the primary screen is always
on
TIMER OFF
The time display of the primary screen will be
off whenever the backlight is off.
SYSTEM RESET
YES
Perform Factory data reset
NO
Factory data reset is abandoned
VERSION-***
Show firmware version number