Extended Manual for RF919 v2.1
© 2024 page 9 of 63
• The radio is independent of national boundary limitations.
o FM has three frequency start points to choose from:
▪ FM1: 87.5-108 MHz
▪ FM2: 76.0-108 MHz
▪ FM3: 64.0-108 MHz
o AM comes with two frequency start points to choose from:
▪ AM 522-1710 kHz (step value: 9 kHz):
▪ AM: 520-1710 kHz (step value: 10 kHz)
• In TF card playback mode, 4 modes are supported:
• Audio streams can be recorded on inserted TF card as MP3 with 160 kBit/s.
• Keyboard lock (on the right side of the radio) to prevent accidental changes.
• A sleep timer can be set as 90, 80, 70, 60, 50, 40, 30, 20 and 10 minutes.
• Two independent alarm times for scheduled power-on can be set.
• Whenever scheduled power-on has been selected, the power-off time after
scheduled power-on can also be set.
• Backlight time for the primary screen, the secondary screen and the keys can
be setup independent from each other. This makes the radio very convenient
for you to use in the darkness.
• Various equalizer settings align the radio to your personal preferences.
• The current temperature, time and date may be displayed on the primary
screen.
• If the radio is connected via USB to a PC it can act as a TF card reader and an
external PC speaker.
• In case you ever completely messed up the radio, you can reset it with the
factory data.
To Next Page
Loading...
