112
Menu Reference
TGRP
Parameter
Options Description
LED Mode Solid or
Flash
Controls whether the Alert
LED flashes or remains on solid
when the Alert LED is used.
LED Color 0-7 Sets LED color to 0-7 as
defined in the GLOB menu.
By default, 0=LED Off, 1=Red,
2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off Normally the Alert LED is active
only while the object is receiv-
ing a transmission. When Latch
is on, the Alert LED will remain
lit after the transmission is com-
plete, unless overridden by a
subsequent object that is also
using the Alert LED.
Backlight On, Off or
Flash
Controls whether the backlight
should be on, off or flashing
while the object is active.
Alarm None,
Chirp,
Hi-Lo,
Alert,
Ring,
2-Chirp,
Fast
Hi-Lo,
DTMF#
Sets the Audible Alarm for the
TGRP object. When an Audible
Alarm is selected, the selected
alarm will play at the beginning
of each transmission on the
TGRP object, or anytime the
scanner stops for activity on the
TGRP object while scanning.
Fav Yes or No When On, the TGRP object is a
member of the Favorites Scan
List.
Skywarn Yes or No When On, the CONV object is
a member of the Skywarn Scan
List.
EXPERT BELOW
Delay On or Off Controls whether a Delay is
used to wait for reply traffic af-
ter a transmission on the TGRP.
To Next Page
Loading...
