102
Menu Reference
Appendix B: Detailed Menu Reference
• Context sensitive help is available for every menu
parameter. Press FUNC SEL to view help for the
selected parameter. Press SEL to exit help.
• Each menu parameter includes a Dflt
softkey, which restores the factory default
setting for that parameter.
GLOB Menu
The GLOB menu stores all of the radio-wide
settings used by the scanner. The active
parameter is always the middle parameter and is
indicated by a flashing colon (:).
Notes:
• Some GLOB parameter changes do not take
effect until the GLOB menu is saved.
• You can restore all GLOB settings to their defaults
without affecting your programmed objects or
V-Scanners. Power cycle the radio, then press
0, then 2 during the welcome message display.
Press ENT to confirm the GLOB parameter reset.
• The Special Global menu (FUNC GLOB)
includes parameter settings that may adversely
affect the performance of your radio if not
set properly. We recommend that users not
change the settings found in the FUNC GLOB
menu without specific instructions. Should
you experience difficulties after changing any
of these settings, you can restore them to
factory defaults by pressing the Dflt softkey
associated with each menu line, or follow the
global reset procedure described above. See
the product support page for this scanner on
www.RadioShack.com for detailed information
on the FUNC GLOB menu.
To Next Page
Loading...
