Radio Shack PRO-651 - Creating Scannable Objects; Understanding Object Menus

28
Creating Scannable Objects
29
Understanding Object Menus
When you turn on your scanner for the first time,
the scanner is in Program Mode for you to create
your first object into memory. If you do not see
this screen, press PGM.
Press NEW to
Create objects
NEW EDIT GLOB
Press F1 to
create a new
scannable
object.
Press F2 to
edit existing
object.
Press F3 to
change the
scanner’s global
configuration
settings.
1. Press F1, the NEW softkey, to begin entering a
new object.
Select object
type to create
TGRP CONV SRCH
Press F1 to
create a new
Talkgroup
Object.
Press F2 to
create a new
Conventional
Object.
Press F3
to create a
new Search
Object.
2. For the purpose of this explanation, press F2,
the CONV softkey.
3. The Conventional Channel menu opens.