82
Advanced Settings
To set the Audible Alarm and Alert LED:
In any object menu:
1. Press q to scroll to any of the following
settings.
•
LED Mode: Solid or Flash controls whether
the LED remains on solid or flashes when the
object is active.
• LED Color: 0-7 sets the color of the LED. By
default, color 0 is used for LED off. You can
change the preprogrammed LED colors in
the Global Settings menu.
• Latch LED: Keeps the LED on after activity
on the object is finished. This is useful when
you need to know if an object was active
while you were away from the scanner.
• Backlight: Off, On, Flash controls whether
the backlight remains off, comes on solid or
flashes when the object is active.
• Alarm: None, Chirp, Hi-Lo, Alert, Ring,
2-Chirp, Fast Hi-Lo, DTMF # are used to set
audible alarms that play each time activity is
found on the object.
2. Press t or u to select the desired option.
3. When finished, press SAVE softkey to save
your changes to the radio’s configuration
memory.
Multi-Site Mode On Networked Systems
Some Motorola and P25 systems include a large
number of sites that are networked together to
provide radio coverage to a large geographical
area. These types of trunked radio systems
are more commonly used for large statewide
To Next Page
Loading...
