48
Organizing Objects
5. Press ENT or the Done softkey to store your
new default Scan List value.
6. Press SAVE softkey to save your changes.
Deleting Objects
To delete an object:
1. Press PGM to enter Program Mode.
2. Press p, q, t or u to navigate to the object
you wish to delete.
3. Press FUNC CL to delete the object.
The scanner will ask you to confirm the delete
command before removing the object from
the scanner’s memory. Deletions cannot be
un-done.
To delete a TSYS using the FIND feature:
1. See “Searching for Objects using FIND” on page 49.
2. Once the TSYS has been located, press the
PGM key, then press FUNC CL.
3. Press the YES softkey at both warnings to
delete the TSYS.
WARNING: All TGRPs associated with the
deleted TSYS will be lost.
To delete a TSYS using the TSYS filter.
1. Press PGM to enter Program Mode.
2. Press the EDIT softkey.
3. Press u u u, and press the TSYS softkey.
4. Press p or q to scroll to the desired TSYS,
then press FUNC CL.
5. Press the YES softkey at both delete warnings
to delete the TSYS.
To Next Page
Loading...
