Radio Shack PRO-651 - Existing Objects; Naming Scan Lists

44
Organizing Objects
45
Existing Objects
1. Press PGM to put scanner in Program Mode.
2. Press p, q, t or u to scroll to the object
you want to change.
3. Press EDIT softkey.
4. Press CURR softkey to edit the current object.
5. Scroll down to Scan Lists:
6. Press u to scroll through the Scan Lists.
7. Press SEL to select On or Off for the desired
scan list item. The asterisk (*) next to the Scan
List number indicates that the object is a
member of that Scan List.
8. Press Save softkey to save change.
Naming Scan Lists
1. Press PGM to put scanner in Program Mode.
2. Press GLOB softkey.
3. Press p or q to scroll to Scan Lists:.
4. Press SEL.
5. Press u to edit the settings for the selected
Scan List.
6. Press p or q to scroll to Tag:, then press u.
7. Use the number keys to enter a name. See
“Appendix C: Text Entry and QuickText” on page
125 for information on entering text.
8. Press Done softkey when finished.
9. Press Save softkey to save changes to the
Global menu.