81
Advanced Settings
Audible Alarms and the Alert LED
Your PRO-651 features an Alert LED with audible
alarm capability that allows you to set different
visual and audible notifications for the different
types of objects you create.
The menus for each type of object include various
settings for LED, Backlight and Alarm. You can
use these settings to design custom visual and/or
audible alarms that are triggered when activity is
detected on the specified Scannable Object.
Notes:
• The Alert LED utilizes a special tri-color Light
Emitting Diode module that mixes light
from red, green and blue LED elements to
produce thousands of different colors. Eight
pre-defined color settings are available
for use in object menus. LED COLOR: 0 is
normally used for “all colors off” or no Alert
LED display.
• Slight variations to LED colors are a normal
part of the manufacturing pr
ocess. You may
notice these variations when using the White
LED color setting (LED COLOR: 7), or when
comparing one PRO-651 to another. You can
compensate for these slight variations by fine-
tuning the Red/Green/Blue (RGB) LED settings
for each color. See the COLOR settings in
the GLOB menu in “Appendix B: Detailed Menu
Reference: GLOB Menu” on page 102.
To Next Page
Loading...
