Radio Shack PRO-651 - Loading a V-Scanner Folder to Main Memory; Erasing V-Scanner Folders

76
Scanner Memory
77
5. The scanner will prompt you to enter a name
for the stored V-Scanner. Use the standard
text entry method to type the name you wish
to use, then press the OK softkey.
6. The scanner will write the contents of main
memory to the V-Scanner folder. This will take
approximately four seconds to complete.
Loading a V-Scanner Folder to Main Memory
1. Press FUNC, then PGM to enter V-Scanner
mode.
2. Press the Load softkey.
3. Press p or q to scroll to the desired
V-Scanner folder, then press the Load softkey.
4. The scanner will ask you to confirm that you
wish to overwrite the current contents of main
memory. Press the YES softkey to proceed, or
the NO softkey to abort.
The data transfer takes approximately 4 seconds
to complete.
Erasing V-Scanner Folders
1. Press FUNC, then PGM to enter V-Scanner
mode.
2. Press the Eras softkey.
3. Press p or q to scroll to the desired V-
Scanner folder, then press the Eras softkey.
4. Press the YES softkey to delete current
contents, or press the NO softkey to abort.