86
Additional Information
Power-On Configuration Key Sequences
Power-on keypress sequences are used as
shortcuts to configuration items, like attenuator
settings, backlight settings and memory
information. Power-on key sequences are also
used to place your scanner into firmware upgrade
mode for CPU and DSP firmware upgrades.
The following table lists the power-on key
sequences available in the PRO-651. Unless
otherwise specified, each sequence is invoked by
pressing and releasing each key in sequence, one
at a time. The first key must be pressed while the
Welcome/Owner screen is being displayed:
Key Sequence
Function
1 Shortcut to PGM>GLOB>Sound Mode
2 Shortcut to PGM>GLOB>Key Beeps
3 Displays Boot, CPU and DSP versions
LIGHT Shortcut to PGM>GLOB>Light Mode
ATT Shortcut to PGM>GLOB>Atten Mode
0, 0 Shortcut to PGM>GLOB>Memory Info
0, 1 Destructive, clears working memory
and resets all Global settings to factory
defaults. Does not affect V-Scanners.
0, 2 Destructive, resets all Global settings to
factory defaults. Does not affect working
memory or V-Scanners.
0, 5
Destructive, executes EEPROM memory
test, then clears working memory and
resets all Global settings to factory
defaults. Does not affect V-Scanners.
0, CL Erases DSP APP Upgrade code, restores
factory DSP version
0, PGM Places radio in DSP APP firmware
upgrade mode
Hold PGM while
powering on
radio
Places radio in CPU firmware upgrade
mode
To Next Page
Loading...
