Radio Shack PRO-651 - Advanced Settings; Priority Scan

78
Advanced Settings
79
Advanced Settings
Priority Scan
Priority Scan operation is available for CONV
and TGRP objects. When Priority Scan is active,
increased priority is given to objects that have
their Priority mode set to ON.
Turning Object Priority On or Off
When the scanner stops on the object while
active, press PRI to select Object Priority on or off.
or
Browse to an object in Manual Mode or Program
Mode. Press PRI to select Object Priority on or
off.
or
1. Browse to an object in Program Mode.
2. Press EDIT, then CURR softkeys.
3. Press q to scroll to Priority.
4. Press t or u to select Priority On or Off.
The plD indicator in the object display will show
lower case “p” for Object Priority Off, and upper
case “P” for Object Priority On.
Turning Priority Scan Mode On or Off
1. While the radio is scanning, press FUNC.
2. Press PRI to toggle Priority Scan On or Off.
Priority Scan status is shown in the main Scanning
status display. PRI indicates that Priority Scan
mode is on, and pri indicates that Priority Scan
mode is off.