Radio Shack PRO-651 - Cloning; Memory Report

76
77
Scanner Memory
Cloning
You can transfer the programmed data to and
from another PRO-651 (or PRO-65) scanner using
a connecting cable which has
1
/
8
-inch stereo
phone plugs on both ends (not supplied).
To clone the scanner data:
1. Turn on both scanners.
2. Connect the connecting cable to each
scanner’s PC/IF jack.
3. Press PGM, then the
GLOB softkey to enter
the Global Settings menu.
4. On the SOURCE radio, scroll to Clone Send:
then press SEL when you are ready to send
data from your SOURCE radio to the TARGET
radio.
Both working memory and global settings are
transferred.
Note: The contents of working memory on the
TARGET radio will be overwritten immediately
when SEL is pressed on the SOURCE radio.
Memory Report
To display the memory usage report:
1. Press
PGM.
2. Press GLOB softkey to access the Global
menu.
3. Press p or q to scroll to Memory Info:.
4. Press SEL to view the memory usage report.
5. Press p or q to scroll the display.