85
Advanced Settings
Notes:
• Multi-site functionality is not available in
EDACS or LTR trunking.
• Threshold settings are only available when
Multi-Site Roam is selected.
• It may be necessary to change the values
used for Threshold Hi and Threshold Low in
the TSYS object to optimize Multi-site Roam
performance.
LTR Home Repeater AutoMove
LTR Home Repeater AutoMove (AutoMove HRs)
takes the guesswork out of programming LTR
trunking systems when the home repeater order
is not known.
By default, AutoMove HRs is turned off and is
controlled in the individual TSYS objects. When
AutoMove HRs is turned on, you may enter the
LTR system frequencies in any order. Your scanner
will automatically move the frequencies to the
proper home repeater slots as transmissions are
received on the system.
To enable LTR Home Repeater AutoMove:
1. Access the menu for the desired TSYS.
2. Press q to scroll to
AutoMove HRs.
3. Press t or u to toggle on or off for the
selected LTR TSYS.
4. Press Save softkey to save your changes.
To Next Page
Loading...
