39
Scanning
In order for the Wildcard TGRP to function
properly, the radio needs to be in SCAN Mode.
This is what enables the scanner to find the
previously stored TGRP objects that need to
be checked before declaring that the found
talkgroup is new and should be scanned as a
Wildcard “hit.”
If you park on a Wildcard TGRP object in Manual
Mode, the scanner is not able to “see” the
previously stored TGRP objects, and every call
on the trunked radio system will come up as a
wildcard hit.
Manual Mode
In Manual Mode, you can browse through the
stored objects in your scanner and select an
object to monitor.
1. Press MAN during scanning to enter Manual
Mode.
2. Press p or q to scroll through the objects
assigned to the current Scan List.
3. Press t or u to browse up and down through
the Scan Lists.
Only Scan Lists that contain objects are shown
when browsing. A quick low-high wrap beep
sounds when the scanner reaches the last
occupied Scan List and wraps back to the
beginning.
To Next Page
Loading...
