122
Menu Reference
STLK Menu
The STLK menu is used when creating new Signal
Stalker II objects, or editing existing Signal Stalker
II objects.
STLK
Parameters
Options Description
Scan Lists On or Off
for Scan
Lists 1-22
Sets membership in Scan Lists.
Use keys to scroll through
Scan Lists. Use SEL key to tog-
gle Scan List membership. A
“*” next to the Scan List num-
ber indicates that the object is
mapped to that Scan List.
Type All Bands
or Pub
Safety
Use to select All Bands or
Public Safety. All Bands covers
the entire frequency range of
the scanner. Pub Safety covers
frequency ranges commonly
used for public safety commu-
nications.
Sub-bands
, SEL
Sub bands are available when
using STLK in All Bands or Pub-
lic Safety mode.
See Appendix A on page 100 for
Search Band Group frequencies.
Tag Alpha-
numeric
text
The alphanumeric display
name for the STLK object. Use
the standard text entry method
or QTXT to name the object.
L/Out On or Off Permanent lockout for the
STLK search. Also accessed by
pressing FUNC L/OUT while
the scanner is stopped on the
STLK object.
LED Mode Solid or
Flash
Controls whether the Alert
LED flashes or remains on solid
when the Alert LED is used.
LED Color 0-7 Sets LED color to 0-7 as de-
fined in the GLOB menu. By
default, 0=LED Off, 1=Red,
2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
To Next Page
Loading...
